vhfBridge

Module for connecting Ajax security systems to third-party VHF transmitters

FAQ

The identifier (ID) is the serial number of the device. It is located under the QR code on the body, board, and packaging of the device.

ID at the bottom of the box

ID under the lid

The ID can also be found in the device states in the Ajax app.

  1. Sign in to the Ajax app.
  2. Select the required hub from the list if you have several of them or if you are using a PRO app.
  3. Go to the Devices menu.
  4. Select a device from the list. Device ID information is located at the bottom of the status screen.
Copied

vhfBridge has 8 zones. Zone types are configured in the Ajax app.

See the list of zone types in the User Manual.

Copied

vhfBridge communicates with the hub using the secure proprietary Jeweller protocol, so connection to third-party security systems is not provided.

vhfBridge also cannot be connected to third-party security systems, because it is not compatible with uartBridge and ocBridge Plus integration modules.

Copied

The minimum cable length for connecting a VHF transmitter to vhfBridge is 2 meters, and the maximum cable length is 7 meters.

It is important to keep to the minimum value to avoid signal overlapping. Exceeding the maximum cable length will result in signal attenuation.

Copied

In this case, events and alarms are transmitted simultaneously via two channels: via the internet and via vhfBridge.

Transmission via the internet works as the main communication channel due to its greater reliability and information capacity. The transmitted events can contain the zone number of the triggered detector, group, user, and other data.

vhfBridge works as a backup communication channel, duplicating all events transmitted via the internet.

The delivery speed of events and alarms in both cases does not exceed 1 second.

Copied

The following vhfBridge outputs work in the bistable mode:

  • arming status
  • hub power
  • vhfBridge power
  • hub battery status
  • vhfBridge battery status

The rest of the outputs work in the pulse mode.

Copied

vhfBridge provides two types of outputs: positive trip and negative trip. The type of outputs is set in the Ajax app.

Copied

vhfBridge can supply the VHF transmitter with 12 V DC, 2 A power.

If the current consumption of the VHF transmitter is more than 2 A, it can be connected directly to the vhfBridge battery.

In this case, turn off battery charge tracking in the vhfBridge settings, so that system users do not receive notifications about a long battery charge.

Copied

vhfBridge provides two types of outputs: positive trip and negative trip. The type of outputs is set in the Ajax app.

vhfBridge can be connected to VHF transmitters with relay inputs. Connection via UART, RS-485, and other interfaces is not supported.

Copied

This option is not provided. See the list of events supported by vhfBridge in the User Manual.

Copied

vhfBridge can be connected to Hub Plus, Hub 2, Hub Hybrid and Hub 2 Plus on OS Malevich 2.12 and later versions.

How OS Malevich updates

Copied

The firmware version can be found in the device states in the Ajax app.

  1. Sign in to the Ajax app.
  2. Select the required space from the list if you have several of them or if you are using a PRO app.
  3. Go to the Devices menu.
  4. Select a device from the list. The firmware version information is located on the status screen at the bottom.
Copied

Featured articles

How to disable device events once for a time the armed mode is active

What functions depend on the device firmware version

What is System integrity check

Spelling error report

The following text will be sent to our editors: