KeyPad TouchScreen

To replace the batteries in KeyPad TouchScreen:

1. Unscrew the fixing screw at the bottom of the keypad.
2. Remove the keypad from the SmartBracket mounting panel by gently pressing and sliding the enclosure upward.
3. Turn off the keypad by pressing and holding the power button for 3 seconds. The keypad will confirm shutdown with the LED indicator (Ajax logo under the screen) flashing red three times.
4. Unscrew the 4 screws using a PH0 screwdriver and remove the keypad’s back panel.
5. Remove the old batteries.
6. Install 6 new AA (1.5V) batteries following the correct polarity.
   

   Do not use old, damaged, or rechargeable batteries.

7. Reattach the back panel and secure it with screws.
8. Turn on the keypad by pressing and holding the power button for 3 seconds.
9. Check the battery status in the Ajax app. Note that battery status updates depending on the device’s ping interval; the default value is 36 seconds.
10. Install the keypad back onto the SmartBracket mounting panel.
11. Check the keypad’s operation after battery replacement by arming and disarming the system using the touchscreen.
12. If the keypad operates correctly, secure it on the SmartBracket with the fixing screw.

If you have any questions or experience difficulties replacing the batteries, please contact Ajax Technical Support:

• Email
• Telegram

Superior KeyPad TouchScreen Fibra and KeyPad TouchScreen Jeweller have the same features and settings, but they have the following differences.

¹ When connected using the U/UTP Cat.5 twisted pair cable.

² The number of codes depends on the hub model.