Available event types depend on the integration module model and operation mode of the connected input devices. More details about supported events you can find in the device user manual:
The table below describes all possible event types of input wired devices:
| Detect alarms operating mode | ||
| Event type | Icon | Meaning |
| Tamper alarm |
 |
Event of a detector or device tamper triggering. |
| Intrusion |
 |
Alarm when motion, opening, and other detectors are triggered. |
| Fire |
 |
Alarm when fire detectors are triggered.  The Ajax portfolio includes a wide range of wireless fire detectors. We recommend using them rather than third-party fire detectors. |
| Auxiliary alarm |
 |
Alarm when pressing the call button for assistance. |
| Panic button |
 |
Alarm when the panic button is pressed. |
| Gas alarm |
 |
Alarm when gas concentration is exceeded. |
| Malfunction |
 |
An event caused by a malfunction of a connected detector or device. |
| Leakage |
 |
Alarm caused by flooding. |
| Glass break |
 |
Alarm when the glass break sensor is triggered. This event type operates only in Pulse operating mode |
| High temperature |
 |
Alarm when the upper temperature limit is exceeded. |
| Low temperature |
 |
Alarm when the lower temperature limit is exceeded. |
| Masking |
 |
Alarm when the device masking is detected. |
| Duress code (opening) |
 |
Alarm when the duress code is entered. This event type operates only in Pulse operating mode |
| Vibration (seismic sensor) |
 |
Alarm when the seismic sensor is triggered. This event type operates only in Pulse operating mode |
| Custom |
 |
The event type is customized by the user.
Not sent to the security company monitoring station and users via SMS. |
| Roller shutter |
 |
Alarm when the roller shutter is triggered. This event type operates only when Input type is configured as Roller shutter. |
| Switch arming modes | ||
| Icon | Meaning | |
 |
You can set up KeyArm Zone that allows switching system arming modes with a third-party device connected to Superior MultiTransmitter Fibra (without casing). KeyArm allows you to arm/disarm the system, individual groups, or manage Night Mode. The KeyArm feature is supported by compatible hubs (except Hub (2G) Jeweller and Hub (4G) Jeweller) with OS Malevich 2.17 and later. If the Followed group feature is configured for groups, their security state can automatically change depending on their settings and initiators’ states. |
|
| Control of blocking element | ||
| Icon | Meaning | |
 |
You can set up Control of blocking element that allows receiving notification on the status of third-party blocking element. The Control of blocking element feature is supported by compatible hubs with OS Malevich 2.25 and later. This feature is part of the inevitability principle (German: Zwangsläufigkeit) flow. |
|
| Control of bolt lock | ||
| Icon | Meaning | |
 |
You can set up Control of bolt lock that allows receiving notifications about the status of the lock bolt. The Control of bolt lock feature is supported by compatible hubs with OS Malevich 2.25 and later. This feature is part of the inevitability principle (German: Zwangsläufigkeit) flow. |
|
You can select the type of alarm in the zone settings. Your selection will configure the connected device’s alarm and event notifications and the event codes transmitted to the Central Monitoring Station (CMS) of the security company.