How to test radio communication between the hub and panic buttons / key fob


You can test the radio communication by pressing the device’s button.

To test SpaceControl, press the disarm button to avoid triggering an alarm. If the command is delivered, the LED will light up green. The red LED indicates that the command has not been delivered.

For Button, it’s better to enable Control mode and temporarily disable scenarios. After pressing the button, the green LED will indicate the delivery of the command. If Button’s LED lights up red — command has not been delivered.

To test DoubleButton, press one of two available buttons: the device will light up green (command was delivered) and then red (no alarm was raised). The LED will light up red twice if the command is not delivered.

Spelling error report

The following text will be sent to our editors: