Internal battery NB (7.2V/95Ah) is a non-rechargeable lithium thionyl chloride battery for powering the hub. The battery’s parameters can be set in the hub settings in Ajax PRO apps.
Functional elements
- Battery.
- Cable.
- Connector for attaching the battery to the hub.
Compatible hubs
A compatible Ajax hub is required for the battery to operate.
The device is compatible with the following hub:
Operating principle
Internal battery NB (7.2V/95Ah) is an internal battery used to power the hub. It can power the hub both independently and as a backup power source when an external battery is used.
Selecting an installation site
When choosing the location of the battery, consider the factors that affect its operation:
- Operating temperature range.
- Permissible humidity level.
The battery must be installed into the casing of the compatible hub.
Consider the placement recommendations when designing your Ajax system. The security system must be designed and installed by specialists. The list of recommended Ajax partners is available here.
Where the battery cannot be installed
- In places with high temperature. For example, near heat sources (radiators, heaters, direct sunlight, etc.). High temperature can cause battery overheating, rapid self-discharge, damage to its components, explosion, or fire.
- In places with high humidity. Moisture can corrode the contacts or cause a short circuit.
- Near flammable materials. Never place the battery near flammable liquids or materials. Doing so increases the risk of fire or explosion, especially if a short circuit occurs.
Preparing to install
Before installing Internal battery NB (7.2V/95Ah), ensure it is compatible with the hub. Also, read this manual and the hub user guide.
Cable arrangement
When preparing for cable routing, check the electrical and fire safety regulations in your region. Strictly follow these standards and regulations. Tips for cable arrangement are available in this article.
Cable routing
We recommend you read the Selecting the installation site section carefully before installation. Avoid deviations from the system project. Violating the basic installation rules and the recommendations of this manual may lead to the device’s incorrect operation.
Installation and configuration
Before installation, ensure that you have selected the optimal device location that meets the requirements of this manual.
Only a professional electrician should install the device.
How to install the battery into the casing
Before installing the battery, read the user manual of the compatible hub. This will help you install the battery correctly and configure the hub settings after installation.
- Remove the front panel of the hub casing.
- Identify the internal battery connector on the board (Internal supply).
- Connect the battery to the board connector.
Observe the polarity. If the battery is connected incorrectly, it will not power the hub, and the connector can be damaged.
The battery cable should not lie on or under the hub board, as this can impair communication with the hub.
- Secure the battery in the casing with ties.
- Turn on the hub.
- Close the hub casing.
- Select the battery type in the hub settings.
- Check the battery connection state in an Ajax app.
How to configure the battery
After installing the battery, select the correct hub settings:
- Open the Ajax PRO app.
- Select the space.
- Go to the Devices tab.
- Select the hub from the list.
- Go to its Settings .
- Open the Service menu.
- Open the Battery settings menu.
- Select the Ajax non-rechargeable lithium battery option for the Internal battery type setting.
tab.
.
States
The hub states include information about the battery connection status. These states can be found in Ajax apps:
- Go to the Devices tab.
- Select the hub from the list.
Maintenance
Internal battery NB (7.2V/95Ah) is maintenance-free and non-rechargeable.
If the battery is not used for a long time, it should be stored at a temperature not exceeding 86 °F. This is necessary to reduce battery degradation.
Technical specifications
Contacting Technical Support
If the device does not function correctly, please contact Ajax Technical Support first. In most cases, technical issues can be resolved remotely.
