How to change batteries in the MotionProtect Plus

To change the battery:

1. Remove the detector from the SmartBracket attachment panel.
   

   

2. Switch off the device.
   

   

3. Loosen three screws and remove the front back of the detector.
   

   

4. Change the battery for a new one of type CR123A, observing the polarity.
   

   Do not install already used or damaged batteries.

5. Reattach the back panel of the detector and tighten the 3 screws.
6. Turn on the detector and check the battery status in the mobile application.
   

   The battery status do not update instantly, but within a ping period (by default, every 36 seconds).