Hood for MotionProtect Outdoor can be mounted even on a detector that is already installed. You don’t need to detach the device from the surface for installing the hood.
To install Hood for MotionProtect Outdoor:
- Remove the protective film from the Dual Lock tape, which is glued to the inner surface of the hood.
- Attach the hood to the detector — part of the tape will stick to the body of the detector.
- Detach the hood from the MotionProtect Outdoor and smooth out the part of the tape that remained on the detector body.
- Put the hood back so that both parts of the tape stuck, fixing the hood on the detector.
