Alarm type icons for the scenario setup:
— motion detection with a motion detector;
— motion detection with left side of DualCurtain Outdoor Jeweller;
— motion detection with right side of DualCurtain Outdoor Jeweller;
— door/window opening detection with a opening detector;
— glass break detection with a glass break detector;
— detection of a change in the tilt angle of DoorProtect Plus Jeweller, Superior DoorProtect Plus Fibra, Superior DoorProtect Plus Jeweller, or Superior DoorProtect G3 Fibra;
— shock detection with DoorProtect Plus Jeweller, Superior DoorProtect Plus Fibra, Superior DoorProtect Plus Jeweller, or Superior DoorProtect G3 Fibra;
— triggering of a third-party wired detector;
— accelerometer alarm with Transmitter Jeweller;
— wire breakage of the roller shutter detector connected to DoorProtect Plus Jeweller, Superior DoorProtect Plus Fibra, Superior DoorProtect Plus Jeweller, or Superior DoorProtect G3 Fibra;
— triggering of the roller shutter opening detector connected to DoorProtect Plus Jeweller, Superior DoorProtect Plus Fibra, Superior DoorProtect Plus Jeweller, or Superior DoorProtect G3 Fibra;
— pressing the panic button;
To run the scenario by pressing the panic button, specify the device: Button Jeweller, Superior Button Jeweller, DoubleButton Jeweller, Ajax SpaceControl Jeweller, Ajax Superior SpaceControl Jeweller, KeyPad Jeweller, KeyPad Plus Jeweller, Superior KeyPad Plus Jeweller, Superior KeyPad Fibra, Superior KeyPad TouchScreen Fibra or KeyPad TouchScreen Jeweller. Running a scenario with pressing the panic button in the app is not provided.
— pressing the Fire button KeyPad TouchScreen Jeweller or Superior KeyPad TouchScreen Fibra;
— pressing the Auxiliary alarm button KeyPad TouchScreen Jeweller or Superior KeyPad TouchScreen Fibra;
— detection of exceeding the threshold temperature with fire detectors;
— detection of temperature jumps with fire detectors;
— smoke detection with fire detectors;
— detection of a dangerous carbon monoxide (CO) concentration with fire detectors;
— activating the manual call point;
— water on the LeaksProtect Jeweller contacts.
The alarm types of devices connected via the integration module depend on the type of device selected in the module settings:
— an intrusion is detected by a third-party device;
—a fire is detected by a third-party device;
— a third-party auxiliary alarm button is pressed;
— a third-party panic button is pressed;
— a third-party device detects an excess of gas concentration;
— a third-party device tamper alarm detected;
— a malfunction of a third-party device is detected;
— water getting on the contacts of a third-party device;
— glass breakage is detected by an external device;
— an external device detects that the threshold temperature has been exceeded;
— an external device detects a decrease in the threshold temperature;
— masking is detected by a third-party device;
— a duress code is entered on a third-party keyboard;
— a vibration is detected by an external device;
— information notification from a third-party wired device;
— a change in the position of the blocking element is detected;
— a change in the position of the bolt lock was detected.
