Tag

Encrypted contactless key fob for keypad

FAQ

The identifier (ID) is the serial number of the device. It is located under the QR code on the body, board, and packaging of the device.

ID at the bottom of the box

ID under the lid

The ID can also be found in the device states in the Ajax app.

  1. Sign in to the Ajax app.
  2. Select the required hub from the list if you have several of them or if you are using a PRO app.
  3. Go to the Devices menu.
  4. Select a device from the list. Device ID information is located at the bottom of the status screen.
Copied

Tag and Pass do not have batteries.

Copied

The maximum number of hubs in Tag and Pass memory is 13.

You can add Tag or Pass on each of the hubs separately using Ajax app.

Copied

You can add a Pass or Tag to one hub using Ajax app:

  1. Go to the Devices menu of the hub.
  2. Click Add Device.
  3. Select Add Pass/Tag from the drop-down menu and follow the instructions in the app.

After that Tag or Pass will work with the new hub as well.

Copied

They have the same functions and differ only in their body: Tag is ankey fob, and Pass is an card.

Copied

KeyPad Plus can work with Tag key fobs, Pass cards, and third-party devices that use DESFire® protocol.

Copied

The firmware version can be found in the device states in the Ajax app.

  1. Sign in to the Ajax app.
  2. Select the required space from the list if you have several of them or if you are using a PRO app.
  3. Go to the Devices menu.
  4. Select a device from the list. The firmware version information is located on the status screen at the bottom.
Copied

Featured articles

How the Authorization confirmation with a passcode feature works

How to configure a space

What is Easy armed mode change

Spelling error report

The following text will be sent to our editors: