For users’ convenience, the 6V PSU for Hub 2/Hub 2 Plus/ReX 2 has been renamed to 6V PSU (type A).
Copied
6V PSU (type A)
Power supply unit for operation of the device from portable battery
FAQ
You can connect any battery with the operating voltage of 4.2–10 V to the hub using 6V PSU (type A).
We recommend using zinc-air alkaline batteries for extended autonomous operation. Before connecting such a battery, remove the stickers or open the air shutoff valves. If possible, leave the battery with access to the air for up to 2 hours. This will trigger a chemical reaction inside the battery and ensure proper functioning.
Below is a list of recommended batteries with guaranteed compatibility.
List of recommended batteries:
- Cegasa eZ8 9/600
- Cegasa eZ8 9/350
- ISKRA KOMPAKT 960
- ISKRA KOMPAKT 700
- ISKRA KOMPAKT 480
- ISKRA KOMPAKT 360
- Masterbattery MC-ZA960
You can calculate the approximate battery life using external battery life calculator.
Copied
Hubs can only work with one power supply: standard or alternative (6V PSU (type A), 12V PSU for Hub 2/ReX 2¹ or 12-24V PSU (type A)).
¹ Discontinued product
Copied
With 6V PSU (type A) the hub can run on an external battery for years — without being connected to the facility’s electric grid — and be ready to protect run-down or empty premises, as well as buildings under construction against burglars, vandals and unauthorized occupants.
12-24V PSU (type A) is used to connect the hub to the low-voltage network of a car, trailer, yacht or to power it from an external battery/power supply.
Copied
Replace the standard 110/230V power supply unit with the 6V PSU.
Copied
Featured articles
