uartBridge — is the module for integration with third-party wireless security and smart home systems.
A wireless network of smart and secure Ajax detectors can be added to a third-party security or smart home system through the UART interface.
Connection to Ajax hubs is not supported.
Supported sensors:
- MotionProtect (MotionProtect Plus)
- DoorProtect
- SpaceControl
- GlassProtect
- CombiProtect
- FireProtect (FireProtect Plus)
- LeaksProtect
Integration with third-party detectors is implemented at protocol level.
Tech specs
| Communication interface with central unit | UART (speed 57,600 Bd) |
| Use | Indoor |
| Radio signal power | 25 mW |
| Radio communication protocol with Ajax devices and detectors |
Jeweller |
| Radio frequency band | 866.0 – 866.5 MHz 868.0 – 868.6 MHz 868.7 – 869.2 MHz 905.0 – 926.5 MHz 915.85 – 926.5 MHz 921.0 – 922.0 MHz Depends on the region of sale. |
| Maximum distance between a wireless detector and uartBridge integration module | Up to 2,000 m (in open area) |
| Maximum number of connected devices | 85 |
| Detection of jamming | Yes |
| Detector performance monitoring | Yes |
| Power supply voltage | DC 5 V (from the UART interface) |
| Operating temperature range | From -10°С to +40°С |
| Operating humidity | Up to 90% |
| Dimensions | 64 × 55 × 13 mm (without antennas) 110 × 58 × 13 mm (with antennas) |
| Service life | 10 years |
