How to replace MotionCam detector batteries


In order to replace the batteries:

1. Remove the detector from the SmartBracket mounting panel.

ajax batter motioncam

2. Turn off the device.

ajax batter motioncam

3. Unscrew 3 screws and remove the back lid of the detector.

ajax batter motioncam

4. Replace the batteries with new CR123A batteries observing polarity.

ajax batter motioncam

Never install used or damaged batteries.

5. Turn on the detector and check the battery status in the app.

The battery status is not updated instantly but during the next polling of the devices (by default, every 36 seconds).