In October 2017, we added the ability to connect any IP-cameras supporting RTSP protocol to the Ajax security system. The latter required obtaining an RTSP link to the video stream, which was a difficult task for the users without experience in connecting video surveillance cameras.
In order to simplify the process to the level of linking of Ajax devices, we have integrated Dahua cameras and video recorders, and now Hikvision and Safire.
How video is transmitted to the Ajax app
The stream from a camera or a video recorder (DVR) is broadcasted to the Hikvision or Safire cloud. The video stream is then transmitted to the Ajax app from the cloud using the manufacturer’s SDK.
You can connect any video recorder and a Hikvision or Safire IP camera to the Ajax security system. In total you can connect:
||Video monitoring (CCTV) devices
||up to 10
||up to 50
Before linking a video recorder and a Hikvision or Safire camera to Ajax
In order to add video surveillance devices, you must have an account with the Hikvision or Safire system: EZVIZ or EasyConnect account. Register if you do not have an account yet.
Connect and configure a camera or a video recorder by following the manufacturer's recommendations.
How to link a Hikvision or Safire account to the Ajax security system
In the Ajax app:
Enter the application menu (click on the 3 horizontal bars in the upper left corner).
Select the Video Surveillance item.
Select Hikvision or Safire.
Log in to your Hikvision or Safire account (EZVIZ or EasyConnect). Register if you do not have an account (you can register directly from the application).
Now, all the cameras and video recorders of the linked Hikvision or Safire account are available for linking to the hubs.
In order to access the cameras associated with other Hikvision or Safire accounts, in the Ajax mobile app:
Go to the Hikvision or Safire menu (Application Menu → Video Surveillance → Hikvision / Safire).
Click Log Out to log out.
Log in to the required account.
Now, all the cameras and video recorders of the new account are available for linking to the hubs. Meanwhile, all the streams previously linked to the hubs are not deleted and remain available for viewing.
How to link a video recorder and a Hikvision or Safire camera to the hub
If your video surveillance system uses a video recorder, you can use two methods to add a video stream to the Ajax applications:
- Linking of a video recorder — all streams of the video recorder cameras are available in the application and you can switch between them in the application. In this case, the video recorder occupies one slot within the hub limit (10 cameras / video recorders for Hub and 50 cameras / video recorders for Hub Plus).
- Linking of individual video recorder cameras — you determine yourself the video recorder camera streams that are available to the hub users. Each camera is displayed as a separate device and occupies a single slot within the hub limit
In order to link a video recorder / camera in the Ajax application:
Go to the Devices tab.
Select Add Device → Add Camera.
- Select Hikvision or Safire.
👆 If you are not logged in to your Hikvision or Safire account, the login screen will open. Log in to your account and try to add a camera or a video recorder again.
- the name of the camera or video recorder
- the room
- the camera or video recorder from the list
- verification code (password from the camera or video recorder), if the password is set when configuring a video surveillance device
|👆 If a video surveillance device is not linked to your Hikvision or Safire account (EZVIZ or EasyConnect), you need to link it. This can be done both through the manufacturer’s applications and through our application via the Add Camera menu (Application Settings → Video Surveillance → Hikvision / Safire).
In order to view the video stream, click on the stream icon in the Ajax application.
In order to expand the stream to full screen, change the smartphone orientation. You can pause a video and take a screenshot.
How to configure user access to camera streams
Access to video streams is provided to the security system users in the hub settings. In order to change the access settings in the Ajax application, go to the user settings [Devices → Hub → Settings (⚙️) → Users → Selected user settings (⚙️)].
Note that access is provided simultaneously to all cameras and video recorders connected to the hub.